water Softener and Carbon Filter

At existing loop, we installed a 1/4 turn shut off with the correct male adaptors in order to transition over to the water softener. We installed a NUGEN 70K Water softener and brine tank. Along with the installation, we provided 3 bags of salt for the initial start-up. We performed a hardness test after installation to ensure we set the water softener to the correct parameters. After the softener was installed, we installed a stage 2.5 NUGEN carbon filter at softener loop location. Carbon filters have their own regeneration cycle and require their own separate drain and air gap. Carbon filter will remove any chloride contaminates inside the home's potable water system. We used stainless steel flexes in order to adapt from male adapters over the carbon filter.